fbpx

DAEIL SYSTEMS

DAEIL SYSTEMS

Active Pneumatic Vibration Isolation System

DVIA-P Series

Designed for Semiconductor Metrology

  • Overview
  • Features
  • Performance
  • Specifications
  • Applications
  • Resources
 

The DVIA-P series is the advanced active pneumatic vibration isolation systems, employing pneumatic servo valve actuators to
control low-frequency vibrations and stabilize semiconductor metrology equipment with ultra-precision motorized
linear stages. The DVIA-P series incorporate extremely sensitive sensors and powerful pneumatic servo actuators,
generating enormous force to counteract incoming vibrations from building floors and deliver
the ultra-fast settling time for nano-resolution imaging without any disturbances.

 
 

Superior Vibration Isolation Performance

The advanced feedback and feedforward vibration control algorithms are embedded in the DVIA-P series,
delivering 40 – 70% at 2 Hz in six degrees of freedom.

 

Designed for Semiconductor
Metrology Equipment

 

Based on analog input and acceleration data in real time, the stage feedforward control system in the DVIA-P series effectively
compensates residual vibrations caused by motorized linear stages. When linear stages travel with large acceleration
and mass, large displacement occurs,the acceleration feedback control of DVIA-P series minimizes the displacement,
reducing the settling time and improving the position accuracy of the system. Furthermore, if analogue outputs
of the stage position displacement acceleration that measured in real-time are connected to the controller,
the stage feed-forward system can be employed. The SFF system generates a force that is proportional to the stage
rotational moment and the stage vibration force, which can reduce the position displacement of the linear stage drastically.

 
 

10 μm Position Accuracy

The position sensors continuously measure the position of the isolation system and then maintains its the position
through a digital signal processor.As a result, the position accuracy of the system is significantly improved.Furthermore,
accelerometers instantly detect vibrationsoriginating from the floor or the moving stages,
then transmit the digital signalsto operate pneumatic actuators to cancel out the vibrations.

 

Powerful Pneumatic Actuators to Support Moving Stage Applications

The DVIA-P series is inherently stiffer than passive vibration isolation system due to the enormous force generated by
the pneumatic actuators. The pneumatic actuators generate the significant amount of force to support
the semiconductor / display metrology equipment with integrated motorized linear stages

 

Feedback & Feedforward Control Algorithm

 
 
 
 
 
DVIP-P-Feedback-and-Feedforward-Control-Algorithm
 

Smart Control System

A digital controller of DVIA-P series employs a A/D 19-channel 16-bit ad a D/A 10-channel 24-bit D/A
converterto obtain synchronous sampling of vibrations. The digital controller controls the system by constantly
calculating all sources of vibration, then transmitting signals to drive the pneumatic actuators.

 

Active Vibration Isolation
in All Six Degrees of Freedom

The DVIA-P series controls vibrations in six derees of freedom including, three translational degrees of motions
( X, Y and Z), and three rotational degrees of motions ( pitch, roll and yaw).

DVIA-P-Absolute-Control-of-Vibrations-in-All-Six-Degrees-of-Freedom
 

On-Site Tunting for Perfection

Floor Vibration levels vary with installation sites, surroundings, irregular events and various vibration sources. Therefore, we offer on-site tuning of the active vibration isolation system, performed by our experienced engineers to guarantee the maximum vibration isolation performance and customers' satisfaction.

 
 

40 – 70% vibration isolation at 2 Hz.
≥90% vibration isolation at ≥4 Hz.

 
DVIP-P-series_performance
 
 
Model DVIA-P550 DVIA-P1000 DVIA-P2200 DVIA-P4000 DVIA-P7000 DVIA-P10000 DVIA-P20000 DVIA-P30000
Isolator Dimensions
(mm)
215 x 160 x 170 240 x 240 x 110 350 x 350 x 110 420 x 420 x 110 450 x 450 x 120 400 x 465 x 240 645 x 600 x 284 735 x 700 x 284
Load Capacity
(kg)
270 – 900 500 - 1700 1100 - 3700 2100 - 7000 3600 - 12000 5000 - 17000 11000 - 38000 150000 - 50000
Actuator Pneumatic Servo Valve Actuator
Maximum Actuator Force Vertical 4400 N 8200 N 18000 N 34000 N 58000 N 83600 N 186000 N 244000 N
Horizontal 390 N 780 N 780 N 1300 N 2200 N 2200 N 5800 N 5800 N
Degrees of Freedom 6 degrees
Active Isolation Range 0.5 - 150 Hz
Vibration Isolation at 2 Hz 40 - 70%
Vibration Isolation at ≥4 Hz. 90%
Input Voltage (V) AC Single Phase 100 - 240 V
Power Consumption (W) 100 W
Operating Range Temperature (°C) 5 - 50 °C
Humidity (%) 20 - 90%
Required Air Pressure ≥ 0.5 MPa (≥ 5 bar)
Required CDA 250 NL/min
 

CD-SEM

Photomask Repair

Photomask Qualification

Automated AFM

Maks Aligner

X-Ray Metrology

X-Ray Defect Inspection

E-Beam Lithography System

Non-Contact 3D Sufrace Metrology

Thin Flim Thickness Metrology

 
 

Ready to get started?