Vibration Isolation Case Studies

DVIA-MB1000 installation tuning for ZEISS GeminiSEM 560 FE-SEM (serial 250714R3). UI-program transmissibility plots (vertical, left-to-right, front-to-back) and on-site equipment photo.

DVIA-T67 (serial 170718R8) tuning and vibration measurement at Tier-1 Semiconductor Cheongju campus P&T6 4th-floor cleanroom K16 for Olympus 3D Measuring Razer Microscope OLS4100. LNSTECH (엘앤에스텍) customer vs Tier-1 Semiconductor end-user site lines match the Word form. Figures: VC, autospectrum, and transmissibility for vertical, left-to-right, and front-to-back axes; Generic Vibration Criteria as a markdown Reference table only (no EMF artwork). Engineer Chaewon Lee (DAEIL SYSTEMS); measurement November 3, 2025; report written November 11, 2025.

DVIA-M1000 installation report (serial 240304R8) for ZEISS SEM EVO 10 at Zeiss Technology (Suzhou) Co., Ltd., Suzhou, China, via YIMO. Overview states the platform is appropriately installed and functioning as intended. Third tuning trial; tuning November 6, 2025; report written November 11, 2025. Equipment condition: The equipment is Turned on/IDLE. The published handout has no separate vibration specification section or measurement summary table. The Tuning Request heading has no embedded figure in the source. Data and Image publishes vertical, left-to-right, and front-to-back transmissibility followed by an on-site equipment photo; Reference uses the standard Generic Vibration Criteria markdown table only (EMF reference graphic not republished).

DVIA-M1000 installation report — Thermo Fisher Scientific FIB-SEM Helios 5 CX (serial 250613R3) for Peking University Shenzhen Graduate School in Shenzhen, China. Overview states the platform is appropriately installed and functioning as intended. The publication follows the on-site form: no vibration specification or measurement summary table; equipment condition The equipment is installed/Turned off. Published figures: tuning-request UI capture, vertical / left-to-right / front-to-back transmissibility plots, on-site equipment photo; Reference uses the standard Generic Vibration Criteria markdown table.

DVIA-MB1000 installation report at Changping P3 Laboratory — Thermo Fisher Scientific HT Tank (serial 250708R5-2). Vertical, left-to-right, and front-to-back transmissibility plots, tuning-request capture, and on-site equipment photo.

DVIA-ULFB700 (S/N 250804R5) active vibration isolation platform installation report for ZEISS FE-SEM EVO 10 at Zhuzhou. Chaewon Lee (DAEIL SYSTEMS) tuned on November 10, 2025; report written November 11, 2025. Measurement summary table and UI-program VC curves, autospectra, and transmissibility vertical / left-to-right / front-to-back; tuning request UI capture and equipment photo.