Vibration Isolation Case Studies

DVIA-MB1000 worksheet P175 (isolator serial 191219R3-5) for a Hitachi HT7800 under Nemo remote tuning: setup on 2020-09-02 and reporting on 2020-09-03 (operator Choi, HyoungMun, Daeil System). The VC-Class summary table matches the source with blank numeric cells, followed by the Good omnidirectional performance line and MB1000 internal-program captures for Z, X, and Y per §2a embed mapping. The raster under the centred title block is not republished.

DVIA-MB1000 serial 191211R4 (project P154) remote tuning handout dated 2020.08.28 for Thermo Scientific Scios 2 installed at Beijing Software Testing & QA Center for National Application Software Testing Labs. Published items follow Word order after the structured setup block; the JPEG under the `(MB1000_191211R4(P154) Set up)` banner is treated as decorative and excluded.

DVIA-MB1000 serial 191121R3 (project P150) for Helios G4 UC via YIMO channel partner; END USER Southern University of science and technology per the summary table with installation place Shenzen, 1st floor. Internal-program plots align with **Z axis**, **X axis**, and **Y axis** headings in the Word document. The decorative graphic on the centered setup-heading paragraph is not republished.

UB1000 (S/N 190923R7, P16 remote tuning worksheet) vibration check after active mounting on ZEISS EVO10 at 高意通讯（深圳）有限公司 6th floor, Shenzhen, delivered via YIMO. Operator Kim, Doohyun; setup and report 2020-08-24. Publication includes the UB1000 setup photograph, 2/5/10 Hz transmissibility summary (Z/X/Y), and UB1000 internal-program Z/X/Y axis plots.

DVIA-MB1000 serial 190109R5 (project P109) for Zeiss Sigma 500 at Suzhou Weixin Electronics (1st floor), YIMO-format remote tuning worksheet dated 2020.08.20. VC-Class summary grid cells are blank in the source; MB1000 internal-program Z, X, and Y screenshots follow Word document order; the decorative raster directly under the centred setup title line is not republished.

DVIA-MB1000 serial 190109R5 (project P109) for Zeiss Sigma 500 via YIMO channel partner; END USER 苏州维信电子有限公司 (MFLEX Suzhou) and installation site Suzhou, 1st floor. Internal-program plots follow **Z axis**, **X axis**, and **Y axis** headings as in the Word document. The smaller JPEG embedded on the centered setup heading block (rId8 / image1.jpeg) is treated as header decoration and not republished. The source worksheet has no Reference / Generic Vibration Criteria section.