Vibration Isolation Case Studies
DAEIL SYSTEMS engineers active vibration isolation systems for the world's most demanding nanoscale imaging and metrology environments.
Series
Equipment Type
Manufacturer
Filtered Case Studies
Hitachi SU3500 SEM DVIA-MB1000 Installation
Hitachi SU3500 SEM DVIA-MB1000 Installation
Hitachi SU8010 SEM DVIA-MB1000 Installation
Hitachi SU8010 SEM DVIA-MB1000 Installation
Hitachi SU8010 DVIA-MB1000 (MB1000 P15) vibration environment measurement — Seoul National University of Science and Technology — 2016-01-12
2016 workbook for MB1000 program P15 (channel partner worksheet) measuring the vibration environment for a Hitachi SU8010 SEM at Seoul National University of Science and Technology (Hyeseong Hall, 2F electron microscopy lab). Published items follow Word §2a embed order after the omitted first-paragraph banner: equipment photograph, VC-CLASS floor vs isolation-top summary and Z/X/Y environment curves, then Z/X/Y built-in-program screenshots with transmissibility and autospectrum (table probe) captures. Separate “Autospectrum (floor)” placeholders appear in plaintext only; no fourth embedded figure per axis was present under word/media.
DVIA-M type (MB1000) installation test report — Nemo — 2015-10-30
MB1000 installation test worksheet for Nemo (measurement 2015-10-28, reported 2015-10-30 by DAEIL SYSTEMS • LIM JONG UK): VC-Class summary on floor versus active top, narrative bullets including FEI Korea site-readiness context, and fifteen figures — Result 1 internal-program transmissibility plus autospectrum-of-table and autospectrum-of-floor for Z/X/Y; Result 2 PULSE 1/3-octave Z/X/Y; Result 3 PULSE g-data Z/X/Y. Decorative title/header-only graphics from the Word handout are not published.
KRICT Building 10 L3 EMI room DVIA-MB3000 vibration environment measurement (September 2015)
Post-install vibration survey at Korea Research Institute of Chemical Technology comparing floor vs DVIA-MB3000 top plate in VC-Class for Z/X/Y axes, including annotated BASE/TOP locations and 1/3-octave velocity curves.
DVIA-M type (MB1000) Installation test — NEMO — 2015-09-03
NEMO DVIA-M type (MB1000) Installation Test Report (installation and measurement on 2015-09-01, reporting on 2015-09-03 by LIM JONG UK, Daeil Systems). Installation Results Summary table and bullets follow the DOCX extract; figures follow paragraph-order §2a mapping — internal-program transmissibility Z/X/Y (rId6–8 → images 1–3), first PULSE 1/3-octave band Z/X/Y (rId9–11 → images 4–6), second PULSE 1/3-octave band Z/X/Y (rId12–14 → images 7–9).