Vibration Isolation Case Studies

MB1000 program worksheet 200522R2-3 (P179) for ZEISS Sigma 300 in Hangzhou: setup summary tables, transmissibility summary at 2 / 5 / 10 Hz, and Signal-program internal performance captures for Z, X, and Y. The large centered graphic placed directly under the Word title line is omitted from the public page as a title-block decorative image.

DVIA-MB3000 (serial 200623R1) active-mount vibration worksheet after TF20-FEI TEM installation at Tier-1 Semiconductor. Measurement date 2020.10.21; internal-program Z/X/Y transmissibility and coherence plots plus installation photograph; summarized frequency picks at 2 Hz, 5 Hz, and 10 Hz with omnidirectional assessment.

DVIA-MB1000 worksheet P914 (platform serial 200730R1) at Schaeffler; measurement and reporting dated 2020.10.05 (operator Choi, HyoungMun, Daeil System). Summary transmissibility table and Korean site notes follow the DOCX; MB1000 internal-program plots are published under Z, X, and Y axis headings. The centred title-line decorative raster is not republished.

DVIA-MB1000 worksheet P132 (serial 190614R2) for a ZEISS_GEMINISEM 500 at Xi'an Jiaotong University (measurement and reporting dated 2020.09.23–2020.09.24; operator Choim, HyoungMun, Daeil System). Summary table transmissibility values and overview text follow the DOCX; MB1000 internal-program screenshots align with Z axis, X axis, and Y axis headings per §2a embed mapping (rId9–11 → image2–4). The decorative raster on the centred MB1000 title line (rId8 / image1) is not republished.

DVIA-MB1000 worksheet P162 (serial 200414R1) for a FEI Apreo C at NORINCO GROUP in Zhanjiang (measurement and reporting dated 2020.09.17–2020.09.18; operator Choim, HyoungMun, Daeil System). Summary table transmissibility values and overview text follow the DOCX; MB1000 internal-program screenshots align with Z axis, X axis, and Y axis headings per §2a embed mapping. The decorative raster on the centred MB1000 title line is not republished.

DVIA-MB1000 worksheet (serial 200522R2-4, program line MB1000 P183) with target equipment Zeiss Sigma 300 for Baosteel Zhanjiang. Operator Munho Noh (Daeil System, research engineer); setup and reporting on 2020.09.11; measurement the same calendar day at zhanjiang with the Overview text and fixed-frequency transmissibility table copied from the DOCX; MB1000 internal-program screenshots under Z axis, X axis, and Y axis follow §2a embed mapping (image2–4). Decorative bitmap on the centred “MB1000_200522R2-4(P183) Set up” title line is not republished. The sheet has no Vibration specification, Reference, or Measurement Summary headings beyond “Summary of measurement results”; none were added.