Skip to main content

Vibration Isolation Case Studies

DAEIL SYSTEMS engineers active vibration isolation systems for the world's most demanding nanoscale imaging and metrology environments.

Series

Equipment Type

Manufacturer

All Case Studies

1296 case studies
Hanyang University M-1000 P8 vibration environment survey — 2014-12-29

Vibration environment survey for the M-1000 P8 platform at Hanyang University (FTC Building, 2F): FEI SEM load with passive/internal setup only, VC-Class summary (ACTIVE state) for Z/X/Y at Base and Top, narrative notes from the result summary, and VAAV program captures for Passive and FFF axes. OCTAVE BAND and Active Z/X/Y sections appear in the issued form without embedded plots.

Hanyang University FEI SEM DVIA-MB1000 (MB1000 P8) vibration environment measurement — 2014-12-29

2014 workbook for MB1000 program P8 measuring vibration environment versus VC-Class criteria for an FEI SEM at Hanyang University College of Engineering (2014-12-29, Choi Sung-won). The Word-first-paragraph raster banner was omitted per DOCX §2a; published figures follow §2a order: VC-Class summary graphic immediately after the measurement-position paragraph, then Active Z/X/Y octave-band plots under OCTAVE BAND.

Korea University M1000 P7 vibration survey — 2014-07-25
Installation Report
DVIA-M Series
07-25-2014

Korea University M1000 P7 vibration survey — 2014-07-25

Vibration environment worksheet for Korea University (College of Engineering industry–university building, 2F) after M-1000 P7 isolator work with an FEI SEM: measurement conditions, VC-Class and transmissibility summary table, discussion notes (including FEI comments, follow-up measurement plans, tuning observations, passive-state peak notes), VAAV captures (Passive Z/X/Y and FFF Z/X/Y), plus transmissibility and octave-band charts rasterized from Word-exported PDF pages (embedded OOXML charts). Decorative title-block raster at the document start (Word image1) is not published.

FEI SEM LSM M-1000 P4 vibration environment measurement — 2014-07-08

2014 measurement with an FEI SEM on an M-1000 P4 isolation platform at the LSM fourth-floor site: ACTIVE VC-Class summary on floor (base) versus platform top, narrative observations from the handout, one site photograph, transmissibility plots for Z/X/Y, and 1/3 octave velocity plots for Active Z/X/Y. Decorative header artwork from the DOCX is omitted from the public page.

LS Mtron — M-1000 P4 vibration measurement with FEI SEM (2014-07-08)

Vibration environment worksheet dated 2014-07-08 for the M-1000 P4 platform with FEI SEM at LS Mtron (4th floor): measurement-location diagram, VC-class summary with transmissibility at 10 Hz, narrative interpretation bullets, six VAAV program captures (Passive and FFF states, Z/X/Y), transmissibility plots (Z and X together; Y on a dedicated view), and 1/3 octave-band Active Z/X/Y curves reproduced in the same layout as the handout charts.

Bruker BioScience demo room — M-1000 P2 vibration environment measurement — 2014-06-18

2014-06-18 vibration environment worksheet at Kins Tower 15F Bruker BioScience demo room (engineer Choi Seong-won, DAEIL SYSTEMS): overview and measurement conditions while Carl Zeiss-mounted equipment was running, VC-Class summary on base versus isolator top under ACTIVE control, four narrative bullets from the handout, two site photographs of sensor placement, six VAAV captures (Passive Z/X/Y and FFF Z/X/Y), passive versus active transmissibility plots exported from embedded Word charts (Z+X combined page, Y-axis page), and 1/3 octave-band active plots (Z+X combined page, Y-axis page). Decorative header bitmap before the title in the DOCX is not republished. Generic vibration criteria are given as the standard markdown table only.