Vibration Isolation Case Studies

DVIA-MB3000 (serial 231113R4-1) setup worksheet dated 2024.03.05 at Hainan University with Thermo Fisher Spectra 300: installation summary fields, Overview statement, and M3000 internal program performance plots (Vertical, Left to Right, Front to Back). Operators Chaewon Lee (DAEIL SYSTEMS) and Lee Chaewon per report header; reporting date 2024.03.13.

DVIA-M1000 abbreviated worksheet for serial 231205R5 (source M1000_231205R5_24.03.05.docx). Setup 24.03.05, reporting 24.03.21; measurement date 2024.03.05 (Tuesday) in Shanghai with operator Chaewon Lee (DAEIL SYSTEMS). END USER and site entity 上海邦芯半导体科技有限公司; target equipment Hitachi Regulus8100 and installation site 上海 per the form. The Overview states the standard DVIA-M1000 sentence only. The issued form does not include separate vibration specification, equipment status, tuning request, measurement summary table, or Reference. Section title “M1000 internal program performance measurement result” is followed by plots labeled Vertical, Left to Right, and Front to Back. Header line reads (M1000_ 231205R5 Set up). Decorative Word header graphics absent from the embedding set; all publishable figures are the three internal-program captures.

DVIA-MB1000 (serial 200109R2) installation tuning and vibration measurement at Seoul National University College of Dentistry; Thermo Fisher Scientific SEM Apreo 2 equipment; Jongwon Park and Chaewon Lee (DAEIL SYSTEMS). Measurement with equipment Turned off. Publishes transmissibility curves, RMS velocity VC curves per axis, and an installation photograph. The header strip graphic before Prepared for and the Reference Generic Vibration Criteria raster figure are omitted; Reference uses the site standard VC criteria markdown table.

On-site DVIA-U1000 (serial 200203R4) inspection after repair with QUATTRO / SignalCalc vibration data and allowable ZEISS SEM EVO18 specification figures. Lattice Semiconductor Philippines clean-room site (Alabang). Inspection 2024.02.16; report written 2024.02.26 by Jongwon Park (DAEIL SYSTEMS). Decorative Word header banner (image1) and Reference criteria artwork (image14) omitted; Generic Vibration Criteria published as markdown table.

DVIA-U1000 (S/N 200203R4) inspection report for ZEISS SEM EVO18 at Lattice Semiconductor — UI program troubleshooting, DSP board replacement, vibration verification (VC / Autospectrum / Transmissibility).

DVIA-PB2200 (serial 220926R2) pre-installation setup and vibration measurement at Hallym University cleanroom (Chuncheon), JEOL JBX-8100F. First tuning trial before equipment placement; displacement sensor and servo valve checks, UI transmissibility (passive/active), and floor vs PB2200 VC curves by axis.