Vibration Isolation Case Studies

Thermo Fisher Scientific Krios G4 Cryo-TEM DVIA-MB3000 Installation

Thermo Fisher Scientific Spectra 300 TEM DVIA-MB3000 Installation

Thermo Fisher Scientific Spectra 300 TEM DVIA-MB3000 Installation

DVIA-MB1000 abbreviated MB1000 worksheet (serial 210701R6 in the issued title line). Setup dated 24.06.24 and reporting dated 24.07.06; measurement date 2024.06.24 (Monday) at Shanghai Jiao Tong University with operator Byeonghun Cho from DAEIL SYSTEMS. END USER reads “Shanghai” on the checklist table; Thermo Fisher Apreo 2S FE-SEM and installation site Shanghai Jiaotong University match the Target equipment / Place of installation rows. The Overview carries the DVIA‑MB1000 standard sentence plus equipment bullets as printed. No vibration isolation system table, vibration specification, equipment status, tuning request, measurement summary table, or Reference section appears in the source. The MB1000 internal program section publishes three plots under Vertical, Left to Right, and Front to Back. Decorative centered header/table layout text from Word is omitted as non-content.

DVIA-MB1000 installation report (serial 240102R2). Published figures: vertical-transmissibility, left-to-right-transmissibility, front-to-back-transmissibility. Reference uses the standard Generic Vibration Criteria markdown table.

DVIA-MB1000 installation report (serial 240119R5) for Wuxi Aotewei Technology Co., Ltd., ZEISS Sigma360 FE-SEM in Wuxi, China. Overview reproduces the published form wording. The handout has no separate End User, Vibration specification, or measurement summary table. Equipment condition lines are reproduced verbatim. Tuning request is shown as the embedded UI capture; Data and Image publishes vertical, left-to-right, and front-to-back transmissibility plus an equipment picture. Decorative header raster and the Generic Vibration Criteria figure are omitted from public assets; Reference is the standard markdown table only.