DVIA-UB700 Required Tools (Field Handout)
DVIA-U Series
DVIA-UB700
Required Tools
Installation support
Field handout
Contents
DVIA-UB700 Required tools
| Number | Sequence of the work | Tool |
|---|---|---|
| 1 | Use a 3mm hex key to remove all the covers. | 3 mm Hex Key |
| 2 | Use an 8 mm hex key to remove four transportation locking brackets. | 6 mm Hex Key |
| 3 | Adjust the metal springs with a 6 mm hex key until the upperpart is 2/3 of the stopper. | 6 mm Hex Key |
1. Use a 3 mm hex key to remove all the covers.
2. Use an 8 mm hex key to remove four transportation locking brackets.
3. Adjust the metal springs with a 6 mm hex key until the upperpart is 2/3 of the stopper.
Share this Case Study
Case Study Information
Category
Installation Report
SeriesDVIA-ULF Series
Date04-29-2022
Tags
DVIA-U Series
DVIA-UB700
Required Tools
Installation support
Field handout
Related Case Studies
DVIA-ULF Series
BGRIMM TECHNOLOGY GROUP TESCAN VEGA GMS DVIA-UB700 (230202R1) Installation Report
06-12-2023Read more
DVIA-ULF Series
Fujian Sanbao Steel Apreo 2C HiVac DVIA-UB700 Installation Report — Fujian
05-02-2023Read more
DVIA-ULF Series
Sigma 300 DVIA-UB700 (221103R3) Installation Report — Shanghai Shengjian Environmental System Technology
04-06-2023Read more